Link Installation

General Installation

Please check with your frame manufacturer for proper bolt torques for your specific frame.

Don't forget to double check your suspension sag after the link install and adjust spring rate as needed.

If you are unsure about the install process of a Cascade Components link on your bike, please contact your favorite local bike shop to help with the install.

More link installation details coming soon…

Link Installation for the Nomad 4

 

Link Installation for the Bronson 3 / Megatower

With the Megatower after installing the link we recommend checking the clearance of all moving parts throughout the bike’s travel. To do this let all the air out of the shock or remove the spring and cycle the bike through its travel. Depending on what tires are running it can be necessary to run the bike in its long setting when using a 230×65 shock.

 

RockShox Shock Stroke Reducer Removal

Removing the shock stroke reducer from the Super Deluxe coil is a very easy process. The stroke reducer is a plastic washer that sits below the bottom out bumper. Follow this step-by-step if you’d like to remove the stroke reducer from your shock. This allows you to get the maximum amount of travel out of the Nomad LT and Megatower LT links without purchasing a new RockShox shock.